Just what is the most effective way to sand a wood flooring?

After years of web traffic, the wood floors are losing their gloss. To renew them, fining sand and re-opening could be essential. Right here’s how you can sand as well as varnish a wood flooring.

Cut the film of paint between the plinth and also the wall with a utility blade. Place a little board against the wall so as not to harm it. Eliminate the skirting board with a nail bar or screwdriver against the board. Spread the plinth at the place of each nail. Number skirting boards as you remove them to facilitate reinstallation. Remove the nails.

To sand a flooring over its whole surface area, use a drum sander. Begin making use of # 80 paper. Starting from the end of the work surface, push the sander towards the flooring battens to around 6 “from the wall surface. Increase the drum while maintaining the sander moving. Go back to your beginning point and start the next area midway along the width of the very first area. When the surface area has been totally fined sand, replace the # 80 paper with # 120. Repeat the procedure utilizing # 150 paper to eliminate the marks left by the previous sanding. It is important to work in a well ventilated area. If required, you can lease some devices or hire professionals. Otherwise, be sure to follow the instructions,

Make use of a perimeter sander, and also the exact same sanding paper numbers in the order recommended in the previous step, to sand along the wall. Scrape hard-to-reach locations, such as radiators, with a paint scraper. At these exact same locations, sand manually.

Beginning by applying the varnish on the edge of the space using a brush that is suitable for the item utilized. After that make use of an applicator recommended by the maker as well as spread out the varnish over the remainder of the floor. Let the time suggested by sablage de plancher Laval .

To complete the job, sand the surface area making use of a finishing sander with a fine-grained abrasive pad.

Leave a Reply

Your email address will not be published. Required fields are marked *